User Instructions
Table Of Contents
- 1 Introduction
- 2 Applicable Module
- 3 Available Global Modular Approvals from Qualcomm Technologies, Inc.
- 4 Additional Regulatory Conformance Testing and/or Submissions Required by the Integrator
- 5 Compliant/Allowable Transmit Power
- 6 Allowable Antennas to Use with the Radio Module
- 7 Antenna Placement Inside the Host System and RF Safety
- 8 Simultaneous Transmission with Other Integrated or Plug-In Radios
- 9 Module May Not Be Installed by End Users
- 10 Required Labeling on the Outside of the Host
- 11 Required Labeling on the Module
- 12 Required Regulatory Wording for User Manual/Installation Manual
- 13 OEM Integrator Checklist
QM8626 Modular Certification OEM Integrator Instructions Required Labeling on the Outside of the Host
80-KA570-12 Rev. B MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 16
For 2.4 GHz
For 5 GHz or 2.4 GHz = 5 GHz dual bands
The European Community R&TTE Directive also requires the following note to consumers
on the outside of the shipping container/packaging:
Important Notice: This product is a radio LAN device
operating in 2.4 and 5 GHz bands (or 2.4GHz band) for
home and office use in the E.E.A.
AT BE CH CY
CZ DE DK ES
FI FR GB GR
EE HU IT IE
IS LI
LT LU
LV MT NL NO
PL PT SE SI
SK
NOTE: The Integrator is expected to translate the text in this section into the appropriate local languages
for the European countries in which the product will be marketed or sold.