User's Manual

20 QCT-7000/QCT-7200 Network Interface Unit User’s Guide
Call restriction levels
Call restriction levels 0–6 are subject to change and are currently defined as
follows for the U.S. market. If outside the U.S., check with your service
provider for call restriction levels.
0 - All calls allowed (default setting)
1 - No 1(900)XXX-XXXX or 976-XXXX calls
2 - Level 1 plus no international long distance calls (011-XXX...)
3 - Level 2 plus no domestic long distance calls (1(XXX)XXX-XXXX
and 0(XXX)XXX-XXXX)
4 - Level 3 plus no special services (X11, except 911)
5 - Level 4 plus no special features (*XX...)
6 - No calls except emergency calls (911)
Call restriction levels 7, 8, and 9 can be customized to serve your needs.
These enable you to add or remove different types of restrictions, one at a
time.
Setting the call restriction password
To control access to the call restriction feature, you must enter a password.
The factory default setting is 0000. To replace this setting, choose any four-
digit sequence that you will be able to remember. Enter it twice for
confirmation. This password allows you to change call restrictions or
override call-restricted numbers.
➤ Lift the handset. Dial on your touchtone telephone:
EXAMPLE
To change the password from the factory default setting to 1234, dial
#23 0000 1234 1234#
NOTE
When creating or changing this password, you must enter the new four-digit
password twice to avoid errors. If an error is made, the touchtone telephone
will respond with an error tone, and no password will be saved until the
password is set again.
<four-digit password> = any sequence of digits, 0 through 9,
with no # or *
# 32
<0000> <four-digit password> <repeat password>
#