User's Manual
Table Of Contents
8 QCT-7000/QCT-7200 Network Interface Unit User’s Guide
USING BASIC FEATURES
Speed dialing, setting a hotline number, and setting alarms are some of the
basic features of the NIU.
Making a call
To make a call using a touchtone telephone connected to your NIU:
1. Lift the telephone handset.
2. Listen for the dial tone. (If you don’t hear a dial tone, see
“Troubleshooting” on page 28.)
3. Press the appropriate numbers on the telephone keypad to dial the
desired phone number.
NOTE
When making an international call, you can accelerate the connection by
pressing the # (pound) key after dialing the number (see page 18).
Speed dialing
The NIU can store up to 20 of your most frequently dialed phone numbers.
Each stored phone number can contain up to 32 key presses.
NOTE
These numbers are separate from any speed-dial numbers that may be stored
in your telephone.
Storing a speed-dial number
➤ Dial on your touchtone telephone:
You will hear a confirmation tone, and the dial tone will resume.
<speed dial location> = 01 through 20 for stored phone numbers
(Programming speed dial locations 1 through 9
requires a leading zero; that is, 01 through 09.)
<phone number> = phone number you want to store
#
<speed dial location> <phone number>
1
#
0