User's Guide

Quick Start: Connecting Unit iii
80-67736-1 Rev. X1
QUICK START: CONNECTING UNIT
➀
Connect your phone to
the Network Interface
Unit (NIU).
a. Slide connector panel cover
(not shown) off back of NIU.
b. Plug your telephone
connector into one of the
telephone jacks on the NIU.
Be sure the phone is set for
touchtone dialing. (See the
“Uses of Your NIU” section.)
c. Plug the other end of the
connector into your
touchtone telephone.
➁
Connect the antenna.
a. Align the nut on the antenna
with the thread on the NIU.
b. Thread the antenna onto the
NIU’s antenna connector and
hand-tighten.
c. Position the antenna
vertically for optimal
reception.
➂
Attach the power source.
a. Insert the small plug on the
AC adaptor into the DC jack
on the back of the NIU.
b. Plug the AC adaptor into any
available AC wall outlet.
3
3
1
1
2
Make a call
1. Lift the handset.
2. Listen for a dial tone. (If
dial tone is not present,
see the
“Troubleshooting”
section.)
3. Press the appropriate
digit keys to dial the
desired phone number.
4. Replace the handset in
the cradle to end the
call.
niu.book Page iii Friday, January 8, 1999 11:04 AM