User's Manual
Table Of Contents
- User’s Guide
- Contents
- Quick Start
- Getting to Know Your Phone
- Safe operating instructions
- Customer Support
- Keys on your phone
- Icons on the screen
- Using Smart Keys
- Turning the phone on and off
- About standby mode
- Viewing your phone number
- Using keyguard
- Locking the phone
- Setting the banner
- Charging the batteries
- Adding an external battery
- Accessories
- Making and Receiving Calls
- To make a call
- To answer a call
- To end a call
- Redialing calls
- Service provider features
- Adjusting the volume
- Setting the ringer type
- Phone Book
- Tip
- Saving a number
- 1. In standby mode, enter the phone number you want to save.
- 2. Press the key under [SAVE]. The Enter Name: screen appears.
- 3. Enter a name to go with the number. To enter letters using the keypad, see “Saving a name with...
- 4. Press the key under [OK] to save the name. The memory location screen appears.
- 5. Do one of the following:
- 6. Press the key under [SAVE] to save this memory location. The Make Secret? screen appears.
- 7. Press the key under [NEXT] to cycle through the options:
- 8. Press the key under [OK]. A confirmation message appears; you have saved the entry.
- Saving a name with a number
- 1. Press the key with the letter or number you want. Press the key once for the first letter, twi...
- 2. To move the cursor manually, press or .
- 3. To delete characters, press .
- To switch cases
- To enter punctuation
- 1. When you enter names, press the key to cycle through these common punctuation marks:
- 2. To open a list of punctuation marks, press . There are three screens of characters, each match...
- 3. Use or to scroll between the screens.
- 4. With the correct screen visible, press the appropriate number to enter each punctuation mark.
- 5. To exit the list without entering a punctuation mark, press .
- Special characters
- French
- Portuguese
- Spanish
- Entering pauses and hyphens
- Dialing from the phone book
- Changing the phone book
- To edit a phone book entry
- 1. Press the key under [BOOK].
- 2. Go to the phone book entry you want to edit.
- 3. Press the key under [VIEW] to see details of the entry.
- 4. Press the key under [EDIT]. The number appears. To edit secret entries, you must first enter y...
- 5. Edit the phone number using , the digit keys, and the volume keys to move the cursor.
- 6. Press the key under [SAVE].
- 7. Edit the name and press the key under [SAVE].
- 8. Edit the memory location and press the key under [SAVE].
- 9. Save the entry as secret or non- secret. Press the key under [OK]. A confirmation message appe...
- To erase a phone book entry
- To edit a phone book entry
- Searching the phone book
- Voice Mail, Pages, and Text Messages
- Types of messages
- Alerts
- Voice mail
- Pages and text messages
- Menus
- Internet Browser and Data Capability
- Internet browser
- Data capability
- Setting up a data connection
- 1. With your phone turned off, plug the flat connector on one end of the data cable into the port...
- 2. Plug the serial connector on the other end of the data cable into the serial port on your comp...
- 3. Turn on your computer.
- 4. Press the PWR button to turn on the phone.
- 5. Open a communications software package on your computer. Follow the directions that came with ...
- Important
- Setting up incoming data or fax calls
- Setting up a data connection
- Caring for Your Phone
- Safety Information
- Radio Frequency (RF) energy
- Driving safely
- 1. Get to know your wireless phone and its features, such as speed dial (page21) and redial (pag...
- 2. When available, use a hands-free device. Add additional convenience and safety to your wireles...
- 3. Position your wireless phone within easy reach. Be able to access your wireless phone without ...
- 4. Let the person with whom you are speaking know you are driving. If necessary, suspend the call...
- 5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or scrol...
- 6. Dial sensibly. If you need to make a call while moving, dial a few numbers, check the road and...
- 7. Do not engage in stressful or emotional conversations. Make people with whom you are talking a...
- 8. Use your wireless phone to call for help. Dial 9-1-1 (U.S.A.) or other local emergency number ...
- 9. Use your wireless phone to help others in emergencies. If you see a traffic accident, crime in...
- 10. Call roadside assistance or a special non-emergency wireless assistance number when necessary...
- Air bags
- Index
44 Caring for Your Phone
Antenna
Follow these guidelines to get the best
reception possible.
■ Fully extend the antenna when you
place or receive a call.
■ Do not touch the antenna while you
are on a call.
■ Do not bend or twist the antenna.
■ Close the antenna when not in use.
Battery
Your phone comes with an internal
LiIon battery that provides excellent
talk and standby time. Leave this
battery in the phone at all times. You
can check the battery power level at
any time using the Battery menu item
(6 8).
You can safely recharge the battery at
any time, even if it has a partial charge.
Power save mode
Your phone automatically switches to
power-save mode if it has not found a
signal after about 15 minutes of
searching. Power-save mode decreases
the drain on the battery.
When the phone is in power-save
mode, you cannot make or receive
calls. “Power Save Mode” and the No
Signal icon ( ) appear on the screen.
The phone periodically rechecks for a
signal. Press any key to check for
service. When the phone finds a signal,
it automatically switches out of power-
save mode and displays the Signal
Strength icon ( ).