User's Manual
Table Of Contents
- User’s Guide
- Contents
- Quick Start
- Getting to Know Your Phone
- Safe operating instructions
- Customer Support
- Keys on your phone
- Icons on the screen
- Using Smart Keys
- Turning the phone on and off
- About standby mode
- Viewing your phone number
- Using keyguard
- Locking the phone
- Setting the banner
- Charging the batteries
- Adding an external battery
- Accessories
- Making and Receiving Calls
- To make a call
- To answer a call
- To end a call
- Redialing calls
- Service provider features
- Adjusting the volume
- Setting the ringer type
- Phone Book
- Tip
- Saving a number
- 1. In standby mode, enter the phone number you want to save.
- 2. Press the key under [SAVE]. The Enter Name: screen appears.
- 3. Enter a name to go with the number. To enter letters using the keypad, see “Saving a name with...
- 4. Press the key under [OK] to save the name. The memory location screen appears.
- 5. Do one of the following:
- 6. Press the key under [SAVE] to save this memory location. The Make Secret? screen appears.
- 7. Press the key under [NEXT] to cycle through the options:
- 8. Press the key under [OK]. A confirmation message appears; you have saved the entry.
- Saving a name with a number
- 1. Press the key with the letter or number you want. Press the key once for the first letter, twi...
- 2. To move the cursor manually, press or .
- 3. To delete characters, press .
- To switch cases
- To enter punctuation
- 1. When you enter names, press the key to cycle through these common punctuation marks:
- 2. To open a list of punctuation marks, press . There are three screens of characters, each match...
- 3. Use or to scroll between the screens.
- 4. With the correct screen visible, press the appropriate number to enter each punctuation mark.
- 5. To exit the list without entering a punctuation mark, press .
- Special characters
- French
- Portuguese
- Spanish
- Entering pauses and hyphens
- Dialing from the phone book
- Changing the phone book
- To edit a phone book entry
- 1. Press the key under [BOOK].
- 2. Go to the phone book entry you want to edit.
- 3. Press the key under [VIEW] to see details of the entry.
- 4. Press the key under [EDIT]. The number appears. To edit secret entries, you must first enter y...
- 5. Edit the phone number using , the digit keys, and the volume keys to move the cursor.
- 6. Press the key under [SAVE].
- 7. Edit the name and press the key under [SAVE].
- 8. Edit the memory location and press the key under [SAVE].
- 9. Save the entry as secret or non- secret. Press the key under [OK]. A confirmation message appe...
- To erase a phone book entry
- To edit a phone book entry
- Searching the phone book
- Voice Mail, Pages, and Text Messages
- Types of messages
- Alerts
- Voice mail
- Pages and text messages
- Menus
- Internet Browser and Data Capability
- Internet browser
- Data capability
- Setting up a data connection
- 1. With your phone turned off, plug the flat connector on one end of the data cable into the port...
- 2. Plug the serial connector on the other end of the data cable into the serial port on your comp...
- 3. Turn on your computer.
- 4. Press the PWR button to turn on the phone.
- 5. Open a communications software package on your computer. Follow the directions that came with ...
- Important
- Setting up incoming data or fax calls
- Setting up a data connection
- Caring for Your Phone
- Safety Information
- Radio Frequency (RF) energy
- Driving safely
- 1. Get to know your wireless phone and its features, such as speed dial (page21) and redial (pag...
- 2. When available, use a hands-free device. Add additional convenience and safety to your wireles...
- 3. Position your wireless phone within easy reach. Be able to access your wireless phone without ...
- 4. Let the person with whom you are speaking know you are driving. If necessary, suspend the call...
- 5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or scrol...
- 6. Dial sensibly. If you need to make a call while moving, dial a few numbers, check the road and...
- 7. Do not engage in stressful or emotional conversations. Make people with whom you are talking a...
- 8. Use your wireless phone to call for help. Dial 9-1-1 (U.S.A.) or other local emergency number ...
- 9. Use your wireless phone to help others in emergencies. If you see a traffic accident, crime in...
- 10. Call roadside assistance or a special non-emergency wireless assistance number when necessary...
- Air bags
- Index
User’s Guide for QCP 860, QCP 1960, and QCP 2760 Phones 31
4-4 Clear Calls erases the recent
history list.
4-5 Clear Book erases the entire phone
book. There is no undo feature.
5 Features
5-1 Auto Answer
sets the phone to
automatically answer after two
rings. This feature is useful in
combination with the Hands-free
Car Kit.
5-2 Auto Retry redials failed calls up to
five times. Auto retry works when
the system is busy or unavailable,
not when the phone line is busy.
5-3 Scratchpad lets you add phone
numbers to the recent history list
during a call without sounding key
beeps. It is only active during calls.
Press the key under [ADD]
to save entry.
5-4 Beep Length sets key beep length
and touch tone playback speed.
5-5 One Touch enables one-touch
dialing. (See “One-touch dialing”
on page 22.)
6 Display
6-1 Backlight
illuminates the phone
screen and keypad.
6-2 Sort Book sorts phone book entries
alphabetically or by location
number.
6-3 Banner lets you enter text (up to 12
characters) to appear on the screen
during power up and standby.
6-4 Show Time displays the date and
time during standby mode.
6-5 Auto Hyphen hyphenates phone
numbers according to the North
American numbering plan.
6-6 Version displays the software
version and product model of your
phone. Press the key under
[MORE] for more information,