User Guide

10 pdQ Basics Handbook
QUALCOMM Proprietary 80-68788-1 Rev X2, PRELIMINARY - 10/26/98
Installing and Charging the Battery
Installing and Charging the Battery
The standard battery provides many hours of phone and organizer
operations.
Your package includes a cradle for storing pdQ smartphone, recharging its
battery, and synchronizing the pdQ smartphone with your computer. The
battery charge indicator light, found on the left side of the cradle, turns
green when pdQ smartphone’s battery is fully charged. It usually takes two
to three hours to fully charge the battery.
After you have entered information into pdQ smartphone, always
synchronize the pdQ smartphone with your computer before
removing the pdQ smartphone battery.
To install and charge the battery:
1 Plug the cradle into an electrical outlet.
2 Hold pdQ smartphone so the keypad faces away from you.
3 Put the base of the battery into the base of the battery slot.
4 Rotate the battery gently until it snaps into place.
X Connect the HotSync cradle to your
computer
14
X Install the Palm™ Desktop software
14
X Perform HotSync™ for the first time
14
Line up teeth
2. Snap down
pdQ basic.book Page 10 Monday, October 26, 1998 8:46 AM