User's Manual

Typical Installation Locations Installation Planning
4-4 1/9/06 80-J4866-1 Rev. A
ALL INFORMATION SUBJECT TO CHANGE
D
RAF
T
DO NOT
CO
PY
Typical Installation Locations
The installation location for a component varies depending on the type of vehicle.
The SDM should be mounted securely to the mounting assembly with clear “line-of-sight” to
the satellite (explained in Chapter 5).
Note
The driver should not use the display unit while the vehicle is in motion.
The display unit is usually installed in the cab so the driver can easily access it.
• If you are using a media display unit (MDU) without the RCD, it is usually installed in the
cab so the driver can easily see the message waiting light from his seat.
• If the display unit is installed in the bunk, you can install a remote message waiting light
(RMWL) so that the driver knows when an Important, Sleepy Important, or Emergency
message has been received.
The MAS is usually mounted in a dry, protected space such as the side box or bunk area.
SDM Cable
Accessory Connections
(e.g., RMWL, Pager,
J1708, RCD, TTS)
(Existing) Power Cable
(Existing)Truck I/O Cable
Power Connections
MAS
Display Cable
Remote
Control Device
Speaker Cable
Display Unit
Scene2A_revised