User's Manual

System Verification Form Basic System Verification
10-16 1/9/06 80-J4866-1 Rev. A
ALL INFORMATION SUBJECT TO CHANGE
D
RAF
T
DO NOT
CO
PY
• If the STATUS does not change to QUIET within 10 minutes, go to Chapter 13 in the
OmniVision™ MCP and Accessory Diagnostic Guide .
23. Verify data base sync is complete.
• If data base sync is complete, go to step 24.
• If data base sync is not complete, go to the
OmniVision™ MCP and Accessory
Diagnostic Guide
.
24. System verification is complete. For verification procedures for optional accessories,
see the appropriate installation chapter in this guide.
System Verification Form
The System Verification Form is provided on the following page. You can make copies of this
form and record important information you may want to keep concerning the vehicle and
MCP.