User's Manual

80-J4866-1 Rev. A 1/9/06 10-1
ALL INFORMATION SUBJECT TO CHANGE
D
R
A
F
T
DO NOT C
O
PY
10
Basic System Verification
Basic system verification is a functional system check that should be performed after
installation or service to verify that the mobile computing platform (MCP) is operating
properly. It should also be performed upon completion of any of the diagnostic procedures
included in the
OmniVision™ MCP and Accessory Diagnostic Guide . This ensures that the
problem is solved and that the MCP is fully functional.
MCNs for components or kits, and DCNs for documents that are referenced in this chapter
can be found in
Appendix E: Component and Document Information .
The topics in this chapter include:
MCP Media Display Unit (MDU) Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
Flowchart for Basic System Verification (MDU) . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
MDU Basic System Verification Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
System Verification Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
If you have technical questions while reviewing this chapter, please contact QUALCOMM
Wireless Business Solutions® (QWBS) Customer Support. Customer Support is staffed 24
hours a day, 365 days a year:
In the United States, call 800-541-7490
In Canada, call 800-863-9191
Note
Several steps of this procedure refer to specific chapters in the OmniVision™ MCP and
Accessory Diagnostic Guide
where you will find possible solutions.
This basic system verification procedure is also provided in the OmniVision™ MCP and
Accessory Diagnostic Guide
.