User's Manual

80-P7567-4 Rev. A MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 10
Figure 2.3 Outdoor antenna installation
Table 2-3 Outdoor antenna cable connections
Patch antenna cable labels MTP9900 LAA antenna ports
1A A1 WiFi MIMO 1 Tx/Rx
2B A2 WiFi MIMO 2 Rx Only
3C A10 LAA Primary Tx/Rx
4D A12 LAA Secondary Tx/Rx
NOTE: Fasten SMA connectors using applied torque no greater than 90 N-cm.
Use a digital or mechanical level to
adjust downward tilt angle of the front
mounting plate to achieve 30 degrees
or more of downward tilt angle.
The face of the patch antenna must be
tilted at least 30 degrees down from
horizontal as shown.