User's Manual

ManualsBrandsQualcomm Technologies ManualsElectronicsLAA Release 13 Small Cell

Qualcomm Technologies, Inc.

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names

may be trademarks or registered trademarks of their respective owners.

This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and

international law is strictly prohibited.

Qualcomm Technologies, Inc.

5775 Morehouse Drive

San Diego, CA 92121

U.S.A.

MTP9900 LAA FCC User Guide

80-P7567-4 Rev. A

July 13, 2016

Summary of content (13 pages)

PAGE 1
Qualcomm Technologies, Inc. MTP9900 LAA FCC User Guide 80-P7567-4 Rev. A July 13, 2016 Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. Other product and brand names may be trademarks or registered trademarks of their respective owners. This technical data may be subject to U.S. and international export, re-export, or transfer (“export”) laws. Diversion contrary to U.S. and international law is strictly prohibited. Qualcomm Technologies, Inc.
PAGE 2
Revision history Revision Date A July 2016 80-P7567-4 Rev. A Description Initial release MAY CONTAIN U.S.
PAGE 3
Contents 1 Introduction .............................................................................................................................. 4 1.1 Purpose ..................................................................................................................................................... 4 1.2 Acronyms ................................................................................................................................................... 4 2 MTP9900 LAA Hardware ........
PAGE 4
1 Introduction 1.1 Purpose The Modem Test Platform 9900 (MTP9900 LAA) is a development small cell base station (eNB) based on the Qualcomm® FSM99xx chipset that can be enabled to support LTE and LAA in the product configuration model "MTP9900 LAA”. The MTP9900 LAA allows demonstration, field trials, and system level evaluation by ODMs/OEMs to validate FSM99xx chipset functionality.
PAGE 5
Acronym 3GPP 80-P7567-4 Rev. A Definition 3rd generation partnership project LTE long term evolution LAA licensed assisted access MAY CONTAIN U.S.
PAGE 6
2 MTP9900 LAA Hardware The MTP9900 LAA is a development small cell (eNB) platform based on the Qualcomm FSM99xx chipset capable of operating in LTE licensed bands (3GPP Release 13, Band 2 and Band 4 only) and LAA unlicensed bands (3GPP Release 13 Band 46: UNII-1 5170-5330 MHz and UNII-3 5725-5850 MHz frequencies only). The MTP9900 LAA utilizes Listen Before Talk ("LBT") for spectrum sharing in the UNII-1 and UNII-3 unlicensed spectrum bands.
PAGE 7
Figure 2.1 MTP9900 LAA external ports 2.3 LEDs The MTP9900 LAA includes 4 LEDs on the front lower right side of the box, and two on the front side of the box toward the bottom.
PAGE 8
Figure 2.
PAGE 9
2.5.1 Outdoor installation required parts ■ Directional patch antenna Manufacturer: Terrawave Solutions Model: M6060060MP1D43602 Available at www.terrawave.com Phone: 210-375-8482 This antenna part, which is available from Terrawave, includes the required tilting mount for outdoor pole/mast or wall mounting.
PAGE 10
Use a digital or mechanical level to adjust downward tilt angle of the front mounting plate to achieve 30 degrees or more of downward tilt angle. The face of the patch antenna must be tilted at least 30 degrees down from horizontal as shown. Figure 2.
PAGE 11
3 MTP9900 LAA Usage 3.1 Power requirements The MTP9900 LAA ships with a 12 V power supply unit that includes a power adapter and cable. This equipment provides the power requirements for the unit. 3.2 Powering on the MTP9900 LAA 1. Connect Ethernet cable to Ethernet port 2 of MTP9900 LAA, for backhaul connectivity. 2. Attach the wall plug of the power supply unit into an electrical socket. 3. Attach the other end of the power supply unit into the power input jack of the MTP9900 LAA.
PAGE 12
4 Regulatory Information 4.1 Federal Communication Commission Interference Statement This MTP900 LAA device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 13
model referenced in the previous section. The antenna must be installed with a downward tilt angle of at least 30 degrees. ■ FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 4.3 Radiation exposure statement The MTP9900 LAA device complies with the FCC RF exposure limits set forth for an uncontrolled environment and is for intended operation as described in this manual.