Product Specs

Packet Modem Spec Rev6.doc 41 06/09/00
8. RF Certification / Restrictions
8.1.1 Certification
The packet data modem, Antenna and cabling as supplied by Qualcomm Inc.
shall be compliant with the following International standards when
configured in accordance with the Qualcomm recommendations. Any
deviation from the guidelines or modifications to the product performed
without the permission of Qualcomm Inc. will invalidate all regulatory
approvals.
Compliance to the technical requirements shall be demonstrated with the
product installed in a non metallic enclosure which provides no additional
shielding or RF protection. An OEM supplied enclosure is required to protect
the product from the effects of electrostatic discharge (ESD) and
environmental conditions that result in the product operating outwith its
specified range.
Compliance to the technical requirements shall be demonstrated with the
product powered by a supply which is compliant with the rules and
regulations of the FCC and the European Community. The OEM
manufacturer is required to provide a power supply that ensures that the
product continues to meet the applicable regulatory requirements for the
specific application.
Qualcomm Inc. does not accept any responsibility for regulatory compliance
of the OEM product and it is the responsibility of the OEM manufacturer to
ensure that all regulatory requirements have been met for the specific
application.
8.1.1.1 Federal Communications Commission (FCC)
The packet data modem configured with the Qualcomm Inc. supplied
Antenna and RF cabling shall be compliant and approved in accordance with
the FCC Code Of Federal Rules (CFR) 47 parts:
Part 1 Para 1.1310 Radio Frequency Radiation Exposure limits
Part 15 Radio Frequency Devices