Product Specs

Packet Modem Spec Rev6.doc 37 06/09/00
7.1.9 Non-Operational Mechanical Shock.
The Packet Data Modem shall operate as specified after being subjected to a
half sine pulsed acceleration wave form of six milliseconds in duration, 30 G’s
peak.
7.1.10 Digital Data Connector Durability.
7.1.10.1 Applied Forces.
The digital data connector shall meet all performance requirements after
application of a 24.5 Nt force on the mating connector. The force shall be
applied in six directions; two opposite directions along each of three mutually
perpendicular axes.
7.1.10.2 Mating cycles.
The digital data connector shall meet all performance requirements after a
minimum of 3,000 connect / disconnect cycles.
7.1.11 RF Connector Durability
The GSP1620 RF connectors shall meet all performance requirements after
500 connect / disconnect cycles at a maximum rate of 12 cycles per minute.
7.1.12 Materials.
The Packet Data Modem shall be manufactured of non-nutrient materials
with respect to fungal growth.
7.1.13 Shipping.
The Packet Data Modem as packaged for shipment shall meet the pre-
shipment test procedures specified in the National Safe Transit Association,
Project 1A.
7.2 Dielectric Resonator Antenna (DRA) Environments