User's Guide

19
Installation
Note
Route the microphone cable and secure it with commercially
available tape so that it will not interfere with driving.
Installing the Hands-Free speaker
For best performance, install the speaker at least 20 inches (50 cm) from the
microphone and do not point it towards the microphone.
1. Remove the two screws to detach the speaker from the bracket.
2. Secure the bracket to an appropriate flat surface in the vehicle using
the two self-tapping screws (supplied), and then remount the speaker
onto the bracket.
Adhere to
Visor
S012_43A
550AA_1999Q
80-98438_book.book Page 19 Thursday, July 8, 1999 4:08 PM