User's Manual

How to Read Your Tagg Map
23-DRAFT May contain U.S. and international export controlled information
 Press the Page button on top of the docking station.
 You will receive a notification of your pet’s location within 3-8 minutes.
 The docking station status indicator will flash blue for 15 minutes.
 The tracker status indicator will flash blue and red for 15 minutes.
 To stop the page before the 15 minutes are up, just press the Page button again.
Note: A page is only successful if the Tagg tracker is within range of the docking station signal. If a page
does not return a location, request an on-demand locate via the Locate button in the Tagg website or text
LOCATE to 52366.
Request the current location of your pet (on-demand locate)
If you want to know the current location of your pet – whether inside or outside of the Tagg zone – you
can request a single locate. See the chart below.
Track your pet
When your pet leaves the Tagg zone, you can turn on the Track feature. The system will update your pet’s
location about every 3 minutes over a 30-minute period. You will receive a notification for every new
location, and it will be updated on the Tagg map. If you still haven’t found your pet after 30 minutes, you
can start another tracking session. See the chart below.
Action Using the Tagg Website Using Text Messages
Before Initiating a Locate or
Track Command
 Open the Tagg Map
 Make sure you have
opted-in for text
message notifications
under Notification
Settings on the Tagg
website.
To Locate
 Click the Locate button
on your pet’s status bar.
A single location will be
given for your pet.
 Text “Locate” to 52366
 If you have more than
one pet, text “Locate
PetName”. Example:
Locate Skipper
 You’ll receive a text
with your pet’s location.