User's Manual

Basic Setup
17-DRAFT May contain U.S. and international export controlled information
*The clear strap is for small collars and gray is for large collars. Collar clip attachment should be snug on your dog’s
collar.
 Attach the tracker to the collar clip by squeezing the release points and snapping it onto the clip
posts. Be sure both sides of the tracker click securely into place:
To remove the collar clip from your pet’s collar, slide the collar clip and strap off the end of the collar or
pull and twist one side of the strap to remove the strap from the collar clip. The tracker works on most
standard flat collars and harnesses.
Do Use: Do NOT Use:
 Standard buckle collars (nylon or
leather)
 Plastic snap closure collars
 Flat harnesses (nylon or leather)
 Metal collars, including training
collars
 Spiked collars
 Collars with studs, jewels, or
other raised adornments
Congratulations! Your Tagg – The Pet Tracker setup is now complete.
Software upgrades
The Tagg system will occasionally send you a notification for a software upgrade – some of the upgrades
will simply keep your system running efficiently and some may be critical to system functionality. It is
important to complete the upgrade as soon as possible.
When you receive an upgrade notification
 Dock the tracker on the docking station.