User's Manual

Basic Setup
16-DRAFT May contain U.S. and international export controlled information
 Remove the tracker from the docking station by squeezing the release points on each side
of the tracker.
The illustrations below demonstrate how the tracker (top) attaches to the collar using the collar clip
(middle) and strap (bottom). Follow these easy steps for proper set up:
 Holding the collar in one hand, place the collar clip on top of the collar as shown here:
 Now, hook one side of the strap into the collar clip groove on one side of the clip:
 Holding the collar clip and strap in place with one hand, use your other hand to stretch
the free end of the strap
* under the collar and up into the groove on the other side of the clip:
CAUTION: It may take some force to stretch the strap all the way. Do not use tools or
other devices to attach the strap. Doing so may result in injury or damage to the clip or
strap.