User's Manual

80-VT321-1 C 9 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
3 AP 1
This section provides information regarding AP software and hardware compatibility. 2
3.1 AP configuration tools 3
The Qualcomm WCN1320-based evaluation AP runs on Linux 2.6.25 and is based on an AMCC 4
processor. The AP can be configured using aniSdkTool, a CLI-based utility application. Note that 5
many common broadband gateway functions are not included in this release (NAT, Firewall, 6
etc.).
7
3.2 AP hardware 8
One device in your hardware kit should be clearly labeled as AP. 9
This release supports the reference designs listed in Table 3-1.
10
Table 3-1 Supported AP hardware 11
Common name Part number Description
AP
DC544D_2
Router with 4x4 WLAN PCIe daughter card and AP software
AP
DC544D_3
Router with 4x4 WLAN PCIe daughter card and AP software
AP
EA544D_2
4X4 WLAN Ethernet adapter card booting AP software
3.3 Connecting to the AP 12
You can control the AP by connecting an Ethernet cable to one of its 4 LAN ports on the AP 13
router or to single LAN port on dongle AP. 14
The CLI-based application, aniSdkTool, is run from the shell on the AP. The shell is accessible 15
through any of the 4 LAN ports using telnet. The LAN ports’ default IP address is 192.168.1.254 16
with a subnet mask of 255.255.255.0. 17
Telnet login is “root” with no password. 18