User Manual
Requirements and Setup
80-VT830-1 Rev. A 13 Qualcomm Confidential and Proprietary
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
#
Summary
Commands
Details
Default
Value
4.
Setting
preferred band
aniSdkTool –s
dfs 0 4
{5GHz}
Preferred band of
operation for DFS when
the AP is configured to
operate in any band. 1 –
5GHz, 0 – DFS
selected.
5 GHz
5.
Setting weight
margin
aniSdkTool –s
dfs 0 5
{percentage}
Minimum percentage
difference in weight
between weight of the
current operating
channel and the weight
of the DFS selected
channel.
20%
6.
Setting CB
threshold
aniSdkTool –s
dfs 0 6
{Threshold}
Maximum threshold
weight above which
DFS will turn off the
channel bonding.
6000000
7.
Enable/Disable
Persisting
radar channel
into flash
aniSdkTool –s
dfs 0 7 {1/0}
Enable or disable
persisting the radar
channel into flash.
Enabled
8.
Enable/Disable
force channel
select
aniSdkTool –s
dfs 0 8 {1/0}
Enable or disable
forcing DFS to pick a
preferred channel,
provided no radar
history is present in
those channels.
Disabled
9.
Enable/Disable
radar parking
aniSdkTool –s
dfs 0 9 {1/0}
Enable or disable
parking “channel
availability check” for
60 seconds when radar
channel is selected.
Enabled
10.
Setting
potential radar
channel weight
aniSdkTool –s
dfs 0 10
{weight}
Setting a minimum
weight to be assigned to
potential radar channels
giving more priority to
non-potential radar
channels.
10
11.
Show DFS
parameters
aniSdkTool –g
dfs 0
Get all the DFS
parameters.
-
1