User's Manual

PAGE 10 | QUALCOMM CONFIDENTIAL AND PROPRIETARY | RESTRICTED DISTRIBUTION
Module Powering Up/Down
6. In order to power up the module:
–
Connect the battery emulator cable to the fixture battery port
– Connect the µUSB cable to the fixture USB port
» The module shall be powered on and the internal LED light shall be constantly GREEN
– If the µUSB cable is not connected, press the Power Button for 3 seconds until
the LED blinks shortly in GREEN. From that point the LED should blink
periodically every 5 seconds
7. In order to power down the module:
–
Disconnect the uUSB cable
– Press the Power Button for 3 seconds until the LED blinks shortly in GREEN
– Disconnect the battery emulator cable from the fixture
Power Button