User's Manual
Table Of Contents
- Product Description
- Chipset
- Key Features and Benefits
- Additional Hardware Features
- Data Rates Supported
- Modulation Types Supported
- Security Features
- Quality of Service (QoS) and Value-Added MAC Features
- Antenna Connections
- Manufacturing-Ready Software
- Interfaces
- Physical
- Operating Voltage
- Recommended Operating Temperature Range
- Recommended Operating Humidity Range
- Recommended Storage Temperature Range
- Recommended Storage Humidity Range
- Peak Power Consumption
- Typical Receiver Sensitivity
- Operating Frequencies/Bands
- Maximum Transmit Output Power
- Physical Dimensions
- Modular Installation
- 65-VF320-P2 Antenna Specifications
- Product Labeling
- Product Usage
- Product Documentation
65-VF320-P2
WLAN MiniPCI a/b/g/n Adapter
Product Specification and Modular Installation
Rev 0.2 • http://www.cdmatech.com/products/wlan.jsp • Page 18 of 21
Qualcomm Confidential Information Document # MA423D_H_PS_V2
Modular Installation
The 65-VF320-P2 is designed specifically for Broadband Gateways and other similar Access Point
applications. The 65-VF320-P2 uses a miniPCI connector for insertion into an attaching system. However,
the 65-VF320-P2 does not conform to the miniPCI PCB size or power restrictions
.
Below is a “typical” 65-VF320-P2 module installation:
Align the miniPCI connector on the 65-VF320-P2 with the miniPCI receptacle on the attaching
system, taking care to fit the notch in the bottom left of the radio module with the tab on the miniPCI
receptacle on the attaching system (see
Figure 3 ).
• Firmly press the radio card towards the attaching system until the clips engage.
• Disseminating end-user documentation for the installation/removal of the 65-VF320-P2 is
expressly prohibited by regulatory statues.