65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation 65-VE240-P1 MiniPCI Adapter (MA423Gd) Product Specification and Modular Installation Document Number 640-00134-01 Published November 2007 Page 1 of 16 Rev 0.2 • http://www.cdmatech.com/products/wlan.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Table of Contents Product Description ............................................................................................................ 4 Chipset ................................................................................................................................ 4 Key Features and Benefits ...................................................................................
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Table 4 802.11n 20 MHz Rx Sensitivity ............................................................................ 9 Table 5 802.11n 40 MHz Rx Sensitivity .......................................................................... 10 Table 6 Operating Frequencies/Bands .............................................................................. 11 Table 7 Tx Power..............................
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Product Description QUALCOMM’s 65-VE240-P1 MiniPCI Adapter design is based on QUALCOMM’s advanced multi-radio WFB4030 Baseband/MAC IC and WFR4031 RF IC, the worlds first commercially available IEEE 802.11b/g/n wireless LAN solution that sends and receives data at up to 315 Mbps.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation • • • Automatic power-on and temperature-based calibration Worldwide regulatory EEPROM RoHS compliant to directive 2002/95/EC (PCB, components, solder) Figure 1 65-VE240-P1 MiniPCI Adapter (top view, RF shield intact) RF FRONT END WFR403 WFB403 TRANSMIT CHAIN BPF ANT PA T/R SW I Q RECEIVE CHAIN 2.4GHz BPF RECEIVE CHAIN 2.4GHz BPF RECEIVE CHAIN 2.
5-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Data Rates Supported • • • IEEE 802.11b: IEEE 802.11g: IEEE 802. 11n: • Proprietary: 1 - 11 Mbps 1 - 54 Mbps 6.5 – 144 Mbps (20 MHz channel) 13.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Recommended Operating Temperature Range • 0 to +70 Cº ambient Recommended Operating Humidity Range • 15% - 95%, non-condensing Recommended Storage Temperature Range • -25 to +85 Cº ambient Recommended Storage Humidity Range • Maximum 95%, non-condensing Peak Power Consumption All power consumption figures for 3.3 V power supply.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Typical Receiver Sensitivity The following tables depict target Rx Sensitivity in dBm as defined in IEEE 802.11 specification(s). NOTE: Tx Power and Rx Sensitivity alone are not sufficient to assess MIMO performance in a multipath environment.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Table 3 802.11g Rx Sensitivity Reference, P29, IEEE Std 802.11g-2003: PER shall be less than 10% at a PSDU length of 1000 byte IEEE 802.11n (10% PER) - 20MHz Channel 20 MHz 20 MHz 800ns GI 400ns GI Data Data Rx Sensitivity MCS Rates Rates Index Mbps Mbps dBm MCS 0 6.5 7.2 -95.5 MCS 1 13.0 14.4 -92.5 MCS 2 19.5 21.7 -90.5 MCS 3 26.0 28.9 -88 MCS 4 39.0 43.3 -85.5 MCS 5 52.0 57.8 -83 MCS 6 58.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation IEEE 802.11n (10% PER) - 40MHz Channel 40 MHz 40 MHz 800ns GI 400ns GI Data Data Rx MCS Rates Rates Sensitivity dBm Index Mbps Mbps MCS 0 13.5 15.0 -93.5 MCS 1 27.0 30.0 -90.5 MCS 2 40.5 45.0 -88.5 MCS 3 54.0 60.0 -86 MCS 4 81.0 90.0 -83.5 MCS 5 108.0 120.0 -81 MCS 6 121.5 135.0 -78 MCS 7 135.0 150.0 -76 MCS 8 27.0 30.0 -91 MCS 9 54.0 60.0 -88 MCS 10 81.0 90.0 -86 MCS 11 108.0 120.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Operating Frequencies/Bands Actual channels/frequencies supported for a given country are governed by regulatory requirements and regulated by EEPROM contents and software. Supported 2.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation IEEE Mode Tx Power Per Chain (dBm) Total Tx Power (dBm) 11b 21 24 11g 21 24 11n 21 24 Table 7 Tx Power Physical Dimensions Weight: 12 grams (including shield) Figure 3 PCB and Shield Mechanical Drawing (dimensions in millimeters) Page 12 of 16 Rev 0.2 • http://www.cdmatech.com/products/wlan.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Modular Installation The 65-VE240-P1 is designed specifically for Broadband Gateways and other similar Access Point applications. The 65-VE240-P1 uses a miniPCI connector for insertion into an attaching system. However, the 65-VE240-P1 does not conform to the miniPCI PCB size or power restrictions.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation Clip Notch Figure 4 Radio Module Alignment 65-VE240-P1 Antenna Specifications The 65-VE240-P1 provides support for three antennas per radio module. These antennas are connected by way of Hirose connectors. It must be noted that there are no special requirements for the types of antennas used with MIMO technology.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.4 GHz AP Applications Product Specification and Modular Installation • • • • • • Frequency Range: 2.4 to 2.5 GHz Impedance: 50 Ohms nominal VSWR: 2.0 Normal Gain: 2 dBi @ 2.45 GHz Radiation: Omni-directional Polarization: Vertical Product Labeling The 65-VE240-P1 radio transmitter module is authorized only for use in a device where the antenna may be installed such that 20 cm can be maintained between the antenna and the users.
65-VE240-P1 802.11b/g/n MiniPCI Adapter for 2.
