User's Manual

18 Using Your Hub18 Using Your Hub
Alternate Configuration for Wired Devices
Most devices will connect wirelessly. The following
directions apply only if your device is not wireless and was
provided with a USB cable.
There is a USB port (type A) on the bottom side of the
2net Hub to connect 2net-approved USB-capable medical
devices to the Hub.

The USB port is not for charging USB devices.
To collect data from a USB-capable medical device:
1. Confirm that both the sending light and reading light
on your Hub are solid GREEN.
2. Take a reading on your medical device.
3. Connect your medical device to the Hub using the USB
cable supplied with your medical device.
▫ Your Hub should automatically receive data from your
medical device. If not, your medical device might have
a “transmit” button or function that you may need
to activate to transmit data. Follow the instructions
provided in the user manual for your medical device.
▫ The Hub’s reading light

flashes GREEN while
medical data is being received.
▫ The Hub’s reading light

turns solid BLUE when your
data has been successfully received.