User's Manual

6
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
Do not operate the 2net Hub in the following environments:
- In active blasting areas
- In potentially explosive environments such as refueling points, fuel
depots or chemical plants
- Near life support equipment that might be susceptible to radio
interference
• Cleaning
- Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning,
but NEVER use water to clean the 2net Hub.
3.3 Implantable Medical Devices
Persons with implantable medical devices should observe the following
precautions:
Always keep the 2net Hub more than 6 inches (15 cm) from the
implantable medical device when the mobile device is turned on.
Unplug the 2net Hub immediately if you have any reason to suspect
that interference is taking place.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your medical device with your implantable medical device, consult your
healthcare provider.
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
11
4 Transmitter Information
4.1 List of Transmitters
Table 4-1. List of transmitters
Technology
Frequency
Band
Transmit
Frequency
Range
(MHz)
Receive
Frequency
Range
(MHz) Nominal Radiated Transmit Power
GSM/
EDGE/
GPRS
850 MHz 824-849 869-894 3,311 mW EIRP/35.2dBm (peak power)
900 MHz 880-914 925-960 3,311 mW EIRP/35.2dBm (peak power)
1800 MHz 1710-1785 1805-1880 1,738 mW EIRP/32.4dBm (peak power)
1900 MHz 1850-1910 1930-1990 1,738 mW EIRP/32.4dBm (peak power)
UMTS/
HSDPA
850 MHz (Band II) 824-849 869-894 316 mW EIRP/25dBm (±1dB) (avg. power)
1900 MHz (Band IV) 1850-1910 1930-1990 479 mW EIRP/26.8dBm (±1dB) (avg. power)
802.11b 2.4 GHz 2400-2484 100 mW EIRP/20dBm (±1dB) (avg. power)
802.11g 2.4 GHz 2400-2484 38 mW EIRP/15.85dBm (±1dB) (avg. power)
Bluetooth
2.1+EDR
2.4 GHz
2402-2480
13 mW EIRP/11.02dBm (±1dB) (avg. power)
ANT+ 2.4 GHz 13 mW EIRP/11.02dBm (±1dB) (avg. power)