User Instructions

80-xxxxx Rev. 1.4 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 25
Confidential and Proprietary – Qualcomm Atheros, Inc.
13 OEM Integrator Required Action Items
A summary of key action items for the OEM Integrator is presented here. However, the
responsible party must read, understand, and adhere to all requirements in this document.
 The OEM integrator will notify Qualcomm Atheros as early as possible in the design cycle
where deviation from the BOM, Schematic, or Layout released by Qualcomm Atheros for the
host PCB RF design is desired per the process:
Request for Review of Deviation from Qualcomm
Atheros Design Specification.
 The OEM integrator will obtain Radiated Spurious Emissions testing per Part 15.247(d) and
15.407(b)
for each unique host system design and submit test reports to Qualcomm Atheros before
host product(s) are launched.
 The OEM integrator will submit to the Host Review for RF Safety and Colocation process, for
each unique host design, as early as possible in the design cycle.
 The OEM integrator will submit antenna specification sheets for each host design per the
process:
Notification for Japan/Taiwan/Korea of Antenna Models to be used with the Module
 The OEM integrator will ensure the Module/SiP is programmed in the factory with compliant
transmit power not exceeding the levels specified in this document.
 The OEM integrator will carefully review global compliance requirements applicable to the
host device for all target markets. OEM Integrator understands additional regulatory testing and
authorizations may apply to the host device, beyond the modular approvals offered by Qualcomm
Atheros per these instructions.