ARS63-S Product name： ： Low Power 1x1 802.11 b/g/n (SDIO) Card © 2000–2009 by Atheros Communications, Inc. All rights reserved.
Atheros®, Atheros Driven®, Atheros XR®, Driving the Wireless Future®, ROCm®, Super AG®, Super G®, Total 802.11n®, and Wake on Wireless® are registered by Atheros Communications, Inc. Atheros SST™, Signal-Sustain Technology™, the Air is Cleaner at 5-GHz™, XSPAN™, Wireless Future. Unleashed Now.™, and 5-UP™ are trademarks of Atheros Communications, Inc. The Atheros logo is a registered trademark of Atheros Communications, Inc. All other trademarks are the property of their respective holders.
Document Conventions Text Conventions bold Bold type within paragraph text indicates commands, file names, directory names, paths, output, or returned values. Example: The DK_Client package will not function unless you use the wdreg_install batch file. italic Within commands, italics indicate a variable that the user must specify. Example: mem_alloc size_in_bytes Titles of manuals or other published documents are also set in italics. Courier The Courier font indicates output or display.
Revision History Revision Description of Changes March 2009 Initial Release Atheros Communications, Incorporated 5480 Great America Parkway Santa Clara, CA 95054 t: 408/773-5200 f: 408/773-9940 www.atheros.
Contents Introduction .......................................................................................................... 8 System Requirements .................................................................................... 8 Profile Management ............................................................................................. 8 Create or Modify a Configuration Profile .................................................... 8 Remove a Configuration Profile ................................
Display Settings ..................................................................................................23 ACU Tools ...........................................................................................................23 Tray Icon..............................................................................................................24 Color.....................................................................................................................25 Quality....................
2.4GHz Operation ........................................................錯誤 錯誤! 錯誤 尚未定義書籤。 尚未定義書籤。 Atheros Communications, Inc.
Introduction The Atheros 802.11n + Bluetooth Adapter supports 802.11n and Bluetooth EDR2.0 operation. The card uses the Atheros Client Utility (ACU) which is a user-mode utility designed to edit and add profiles for selected Atheros network interface adapters. System Requirements Laptop/ PC containing: 32-bit PCI Express Bus 32 MB memory or greater 300 MHz processor or higher Microsoft Windows 2000, Windows Millennium Edition, Windows 98 Second Edition, Windows XP, or Windows NT 4.
Note that the ACU only allows the creation of 16 configuration profiles. After the creation of 16 profiles, clicking the New button displays an error message. Remove an old profile or modify an existing profile for a new use. Remove a Configuration Profile 1. Go to the Profile Management tab. 2. Select the profile to remove from the list of configuration profiles. 3. Click the Remove button.
Switching to a Different Configuration Profile 1. To switch to a different profile, go to the Profile Management tab. 2. Click on the profile name in the Profile List. 3. Click the Activate button. The Profile List provides icons that specify the operational state for that profile. The list also provides icons that specify the signal strength for that profile. Import and Export Profiles Importing a Profile 1. From the Profile Management tab, click the Import button. The Import Profile window appears. 2.
General Tab In the Atheros Client Utility, access the General tab by clicking New or Modify on the Profile Management tab. Edit the fields in the General tab to configure the configuration profile. Make sure to also edit the Security and Advanced tabs. Profile Name Identifies the configuration profile. This name must be unique. Profile names are not case sensitive. Client Name Identifies the client machine. Network Names (SSIDs) The IEEE 802.11 wireless network name.
Security Tab In the Atheros Client Utility, access the Security tab by clicking New or Modify on the Profile Management tab. Click the Security tab in the Profile Management window. Edit the fields in the Security tab of Profile Management to configure the profile. To define the security mode, select the radio button of the desired security mode. Make sure to also edit the General and Advanced tabs. WPA/WPA2 Enables the use of Wi-Fi Protected Access (WPA).
Allow Association to Mixed Cells is checked on the Security Tab to allow association. None No security (not recommended). Using EAP-TLS Security To use EAP-TLS security In the Atheros Client Utility, access the Security tab in the Profile Management window. 1. On the Security tab, choose the WPA radio button. OR: On the Security tab, choose the 802.1x radio button. 2. Choose EAP-TLS from the drop-down menu.
Enter the domain name of the server from which the client will accept a certificate. Change the login name if needed. 5. Click OK. 6. Enable the profile. Using PEAP (EAP-GTC) Security To use PEAP (EAP-GTC) security In the Atheros Client Utility, access the Security tab in the Profile Management window. 1. On the Security tab, choose the WPA radio button. OR: On the Security tab, choose the 802.1x radio button. 2. Choose PEAP (EAP-GTC) from the drop-down menu.
Using PEAP-MSCHAP V2 Security To use PEAP-MSCHAP V2 security In the Atheros Client Utility, access the Security tab in the Profile Management window. 1. On the Security tab, choose the WPA radio button. OR: On the Security tab, choose the 802.1x radio button. 2. Choose PEAP (EAP-MSCHAP V2) from the drop-down menu. To use PEAP (EAP-MSCHAP V2) security, the server must have WPA-PEAP certificates, and the server properties must already be set. Check with the IT manager. 1. Click the Configure button. 2.
Using LEAP Security To use security In the Atheros Client Utility, access the Security tab in the Profile Management window. LEAP security requires that all infrastructure devices (e.g. access points and servers) are configured for LEAP authentication. Check with the IT manager. Configuring LEAP On the Security tab, choose the WPA radio button. Choose WPA-LEAP from the drop-down menu. OR: On the Security tab, choose the 802.1x radio button. Choose LEAP from the drop-down menu. 1.
Pre-Shared Encryption Keys Defining pre-shared encryption keys: 1. Click the Pre-Shared Key (Static WEP) radio button on the Security tab. 2. Click the Configure button. 3. Fill in the fields in the Define Pre-Shared Keys dialog box: Key Entry Determines the entry method for an encryption key: hexadecimal (0-9, A-F), or ASCII text (all keyboard characters except spaces). Encryption Selects the default encryption keys used.
Disabling Static WEP To disable static WEP for a particular profile, Select any other security option on the Profile Management tab to automatically disable static WEP OR: choose None on the Security tab to disable security, and click OK (not recommended). Using WPA Passphrase Security To use WPA Passphrase security In the Atheros Client Utility, access the Security tab in the Profile Management window. 1. 2. 3. 4. On the Security tab, choose the WPA Passphrase radio button. Click on the Configure button.
Power settings Active/Passive scanning (where applicable) Transmit power Wireless band Short/Long preamble (802.11b) When Zero Configuration is in use, a pop-up message is displayed on the ACU when you attempt to create or edit a configuration profile from the Profile Management tab of the ACU. To turn Zero Configuration off on Windows XP, take the following steps: 1. In Windows XP, open the Wireless Network Configuration Properties dialog box. 2.
Current Channel Shows the currently connected channel. Server Based Shows whether server based authentication is used. Authentication Data Encryption Displays the encryption type the driver is using. Configure the encryption type on the Security tab. Signal Strength Shows the strength of the signal. Click the Advanced button to see the advanced status diagnostics.
Transmitted Frames Frames transmitted OK Frames retried Frames dropped No ACK frames ACK frames RTS frames Clear-to-send (CTS) frames No CTS frames Retried RTS frames Retried data frames Received Frames Frames received OK Beacons Frames with errors CRC errors Encryption errors Duplicate frames AP mismatches Data rate mismatches Authentication time-out Authentication rejects: the number of AP authentication failures received by the wireless network adapter Association time-out Association rejects: the numbe
Ad Hoc Network Connected Ad Hoc Network Encryption Active Atheros Communications, Incorporated 5480 Great America Parkway Santa Clara, CA 95054 t: 408/773-5200 f: 408/773-9940 www.atheros.
Display Settings To change the display settings, choose Options > Display Settings from the menu. The display settings dialog box contains tools to set the: Signal Strength Display Sets the units used when displaying signal Units strength: percentage (%) or dBm. Refresh Interval Use the up/down arrows to set the display refresh interval in seconds. Data Display Sets the display to cumulative or relative: Relative displays the change in statistical data since the last update.
Tray Icon The tray icon appears at the bottom of the screen, and shows the signal strength using colors and the received signal strength indication (RSSI). Hold the mouse cursor over the tray icon to display the current configuration profile name and association, as well as transmit and receive speed and the wireless adapter name and IP address. Right-click on the tray icon to: Help Open the online help. Open Atheros Client Launch the Atheros Client Utility (ACU).
Adapter IP Address Displays the IP address of the wireless adapter. Exit Exit the Atheros Client Utility application. The colors are defined as follows: Color Quality RSSI* Green Excellent 20 dB + Green Good 10-20 dB + Yellow Poor 5-10 dB Red Poor < 5 dB Gray No Connection No Connection *Received signal strength indication RSSI. Displayed in dB or percentage. Enable or disable the tray icon in the Action menu.
802.11b Preamble (if using 802.11b) Wireless Mode When Starting an Ad Hoc Network Make sure to also edit the General and Security tabs. Infrastructure (Access Point) Mode In infrastructure (access point (AP)) mode, the wireless network adapter participates in a basic service set (BSS) as a station, and communicates with the other stations through an AP, as illustrated here. To connect to an access point network, configure the profile for access point mode.
Uninstall an Old Driver Uninstall an old driver before upgrading to a new NDIS driver release. To remove the newly installed driver from the system if the system does not have previously installed versions of the NDIS driver, proceed to Step 4. 1. To remove the NDIS driver from the OS, go to Device Manager, right-click Atheros AR500x Wireless Network Adapter, and choose Uninstall. 2. Click OK to uninstall the device. 3.
Bluetooth Adapter Installation and Operation Getting Started This chapter describes how to install, uninstall, launch, and use the Bluetooth Suite.
Follow the rest of the installation procedure described in “Copying Bluetooth Suite from the CD” on page 2-2. Copying Bluetooth Suite from the CD 1. Insert the CD containing the Bluetooth Suite into the CD drive. 2. Double Click on the Bluetooth Suite setup.exe file. The InstallShield Wizard starts to prepare the package for installation. The Welcome to InstallShield Wizard for Bluetooth Suite screen (see Figure 2-1) is displayed. Figure 2-1. Bluetooth Suite - Welcome Screen 3. Click Next.
Figure 2-2. Bluetooth Suite Customer Information Screen 4. Enter the user name and company name and choose the intended user of this application - “Anyone who uses this computer (all users)” or “Only for me” and click Next. You will see Choose Destination Location screen. See Figure 2-3. Figure 2-3. Bluetooth Suite Choose Destination Location Atheros Communications, Incorporated 5480 Great America Parkway Santa Clara, CA 95054 t: 408/773-5200 f: 408/773-9940 www.atheros.
5. The default destination location is already selected. Click Change to browse to a different destination. 6. Click Next. You will see Start Copying Files screen that displays the current settings including user information, setup type, and destination directory. This allows you to review and modify the setup information. See Figure 2-4. Figure 2-4. Bluetooth Suite - Start Copying Screen 7. Click Next. The Bluetooth Suite begins to configure and copy the new software. It also removes any backup files.
Figure 2-6. Bluetooth Suite - Finishing the Installation The installation is complete. This process creates a ‘Launch Bluetooth Suite’ shortcut on your desktop. Now you are ready to run Bluetooth Suite. Launching the Bluetooth Suite 1. Insert the Bluetooth Suite USB device into the USB port of your system. NOTE: You can insert the Bluetooth Suite USB device in any USB port. You might see Found New Hardware message. 2.
Figure 2-7. Bluetooth Suite Startup Screen During Discovery When the Bluetooth Suite finds devices in range, it displays them. See Figure 2-8. Atheros Communications, Inc.
Figure 2-8. Discovered Bluetooth Devices NOTE: Trusted remote devices will show Paired status in Device list, and Connected remote devices will show Connected status in Device list. Other devices will display Inrange status. Introduction to the Bluetooth Suite Now that you have successfully launched the Bluetooth Suite, spend few minutes in getting to know your Bluetooth Suite. The following few pages explain various features and components associated with the Bluetooth Suite GUI.
Menu Bar Bluetooth menu is the primary menu on the Bluetooth Suite screen. The options associated with this menu are: Search for Device Bluetooth Configuration Bluetooth Help Topics Bluetooth Exchange Folder About Bluetooth NOTE: Some of these functions are available from the Bluetooth Suite Tray. These options are described below in detail. Search For Device Clicking this button begins to search for remote Bluetooth devices in range. Found devices will display in right panel.
Bluetooth Exchange Folder Clicking this button to display the content of Bluetooth exchange folder. From Bluetooth Suite window, choose Bluetooth->Bluetooth Exchange Folder to access Exchange share folder for Object Push feature. Bluetooth Places Panel When you launch the Bluetooth Suite, various Bluetooth devices in the Bluetooth neighborhood are listed on the right panel.
Uninstalling the Bluetooth Suite Anytime you install a new version of Bluetooth Suite, you need to uninstall any existing version of the Bluetooth Suite. Follow this procedure to uninstall the Bluetooth Suite. 1. Make sure the Bluetooth dongle is removed from any system USB port. 2. Choose start > All Programs > Bluetooth Suite > Uninstall Bluetooth Suite. The system prepares for uninstallation. A screen is briefly displayed that shows that it is ready to uninstall the program.
The uninstall is complete. You are ready to reinstall the Bluetooth Suite. Atheros Communications, Incorporated 5480 Great America Parkway Santa Clara, CA 95054 t: 408/773-5200 f: 408/773-9940 www.atheros.
Connecting to an HID Device This chapter describes how to connect the Bluetooth laptop to a Bluetooth HID (Human Interface Device) such as a mouse. Setup Requirements You need the following devices and equipment in order to accomplish this task: A PC system running Windows with Bluetooth Suite Atheros Bluetooth USB Adapter (dongle) Bluetooth mouse with batteries or keyboard Launching the Bluetooth Suite 1.
Figure 4-1. Bluetooth Places Screen 4. Make sure the device that you wish to pair or connect is powered up and in discoverable mode. If it is in range and has previously been paired, turning on the device will automatically pair it. 5. Right click on the mouse and choose Pair. It displays the Bluetooth Pairing Passcode screen. See Figure 4-2. Figure 4-2. Entering Bluetooth Pairing Passcode 6. Enter a passcode to pair with the remote device and click OK. NOTE: The default code shown is 0000.
8. Right click the Connect button. Atheros Communications, Inc.
9. You will be prompted to make sure the device is in discoverable mode. Make sure the device in ON and in connectable mode. See Figure 4-4. Figure 4-4. Putting Device in Connectable Mode 10. Click OK. You will notice that the Wizard begins to install software for the HID device. As soon as the installation is complete, the screen disappears. Its service status of the HID changes from Disconnected to Connected. Your mouse is now connected and ready to use.
Launching the Synchronization Process 1. Launch the Bluetooth Suite. 2. Choose My Bluetooth Place from the Bluetooth tray on your desktop. It displays the My Bluetooth Place start-up screen. 3. Right mouse click the blank panel and choose Device Discovery option. See Figure 10-1. Figure 10-1. Bluetooth Suite Discovery Screen 4. Highlight the device that you wish to sync with and pair it. See Figure 10-2. Figure 10-2. Pairing the Device for Syncing 5.
6. Enter the pairing code (0000) to pair it and click OK. Figure 10-3. See Figure 10-3. Bluetooth Devices Pairing 7. You will see the passcode prompt. Enter the passcode (default is 0000) for the selected device and click OK. NOTE: The default code shown is 0000. Refer to the documentation of your device to find out the passcode of your device and how to change it. 8. Right click the SYNC icon on My Bluetooth Place under the specified device screen and choose Synchronization option. See Figure 10-4.
Figure 10-4. Bluetooth Synchronization It displays the Sync screen which allows you to specify sync parameters for both client and server. See Figure 10-5. Atheros Communications, Inc.
Figure 10-5. Selecting Items to Synchronize 9. Select the Sync items under the server and client that you wish to synchronize and click OK. The selected items will be synchronized. Atheros Communications, Incorporated 5480 Great America Parkway Santa Clara, CA 95054 t: 408/773-5200 f: 408/773-9940 www.atheros.
Advanced Status Information Click the Advanced button on the Current Status tab of the Atheros Client Utility to see advanced information about the program and its operations. The Current Status tab does not require any configuration. The following table describes the items found on the Advanced Status screen. Network Name (SSID) Displays the wireless network name. Configure the network name on the General tab. Server Based Shows whether server based authentication is used.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The transmitter module may not be co-located with any other transmitter or antenna, For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the enduser regarding to Regulatory Domain change. As long as 3 conditions above are met, further transmitter test will not be required.
Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 3.62 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada.
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization.
依據國家通訊傳播委員會低功率電波輻射性電機管理辦法： 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 本模組於取得認證後將依規定於模組本體標示審合格籤，並要求平台上標示「本產品內含射頻模 組：XXXXXXXXXX」 Japan Telecom Certification – JATE Atheros Communications, Incorporated 5480 Great America Parkway Santa Clara, CA 95054 t: 408/773-5200 f: 408/773-9940 www.atheros.
