User's Manual
Table Of Contents
- Introduction
- Check the components
- Safety instructions
- Getting Started & Grand Tour
- Basic Operations & Home screen
- Using the Touch Screen
- Getting to know the TOSHIBA HOME Menu screen
- Opening and switching applications
- Opening the Settings screen
- Working with menus
- Monitoring your device’s status
- Managing Notifications
- Locking your screen
- Customizing the Home screen
- Changing the Screen Orientation
- Screen Capture
- Backup/restore settings and applications
- Factory Reset
- Connecting to networks
- Applications & Widgets
- Settings
- Hardware & Options Operation
- Troubleshooting
- Specifications
- Regulatory information
- Copyright
- Disclaimer
- Trademarks
- AVC/H.264 License Notice
- FCC information
- CE compliance
- Indication of restrictions of use
- Working environment
- Additional environments not related to EMC
- REACH - Compliance Statement
- Following information is only valid for EU-member States:
- Canadian regulatory information (Canada only)
- Canada – Industry Canada (IC)
- Wireless LAN and your Health
User’s Manual 31
Connecting to networks
Turning Bluetooth on or off
1. Open the Settings screen.
2. Tap Wireless & networks.
3. Check or uncheck Bluetooth to turn it on or off.
Changing your device’s Bluetooth name
Your device has a generic Bluetooth name by default, which is visible to
other devices when your connect them. You can change the name so that it
is more recognizable.
1. Open the Settings screen
2. Tap Wireless & networks -> Bluetooth settings.
The Bluetooth settings screen will be displayed.
3. If Bluetooth isn’t turned on, check Bluetooth to turn it on.
4. Tap Device name. Enter a name and tap OK.
Pairing your device with a Bluetooth device
You must pair this device with another device before you can connect to it.
Once you pair this device with another device, they stay paired unless you
unpair them.
1. Open the Settings screen.
2. Tap Wireless & networks -> Bluetooth settings.
3. If Bluetooth is not turned on, check Bluetooth to turn it on.
Your device will scan for and display the Bluetooth names of all
available Bluetooth devices in range.
4. If the device you want to pair with is not included in the list, make it
discoverable. See the documentation that came with your device to
learn how to make it discoverable by this device, and for other
instructions for pairing.
5. If this device stops scanning before you make the other device
discoverable, tap Scan for devices.
6. Tap on the Bluetooth name of the device in the list in settings to pair
them.
The devices pair with each other. If you’re prompted to enter a
passcode, try entering 0000 or 1234 (the most common passcodes), or
consult the documentation that came with the device to learn its
passcode. If the pairing is successful, your device connects to the
device.
Connecting to a Bluetooth device
Once paired, you can connect to a Bluetooth device. For example, to switch
devices or to reconnect after your TOSHIBA FOLIO 100 device and this
device come back into range.
1. Open the Settings screen.
2. Tap Wireless & networks -> Bluetooth settings.