User's Manual

PRELIMINARY
Atheros Communications, Inc. Page 16
COMPANY CONFIDENTIAL March 2004
To turn Zero Configuration off on Windows XP, take the following steps:
1. In Windows XP, open the Wireless Network Configuration Properties dialog box.
2. Clear the check box “Use Windows to configure my wireless network settings” to set Zero
Configuration.
When this check box is cleared, all profile settings are controlled by the configuration profile,
which is set up from the Station Configuration tab of the ACU.
Check the Status Information or Diagnostics
The Atheros client utility includes a number of tools to display current diagnostics and status
information.
• Check current status
• Check driver information
• Check receive and transmit diagnostics
Current Status
The Current Status tab contains general information about the program and its operations. The
Current Status tab does not require any configuration.
The following table describes the items found on the Current Status screen.
Profile Name
The name of the current selected configuration profile. Set up the
configuration name on the General tab
.
Link Status
Shows whether the station is associated to the wireless network.
Wireless Mode
Displays the wireless mode. Configure the wireless mode on the
Advanced tab.
IP Address
Displays the computer's IP address.
Network Type
The type of network the station is connected to. The options include:
• Infrastructure
(access point)
• Ad Hoc
Configure the network type on the Advanced tab.
Current Channel
Shows the currently connected channel.