User's Manual

PRELIMINARY
Atheros Communications, Inc. Page 28
COMPANY CONFIDENTIAL March 2004
FCC OEM Labeling instructions:
OEM should add following label:
Contain FCC ID:PPD-AR5BMB-00044
Contain FCC ID:PPD-AR5BMB-00043
Above should be clearly visible on products where AR5BMB-43 and AR5BMB-44 modules
are installed.
Industry Canada Notice (Applicable to Use Within Canada):
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment (or its transmit
antenna) that is installed outdoors is subject to licensing. The installer of this radio equipment
must ensure that the antenna is located or pointed such that it does not emit RF field in excess of
Health Canada limits for the general population; consult Safety Code 6, obtainable from Health
Canada’s web site www.hc-sc.gc.ca/rpb
.
Avis de Conformité à la Réglementation d’Industrie Canada:
Pour empêcher toute interférence aux services faisant l'objet d'une licence, cet appareil doit être
utilisé à l'intérieur seulement et devrait être placé loin des fenêtres afin de fournir un écran de
blindage maximal.
L’installateur du présent matériel radio doit s’assurer que l’antenne est située ou pointée de
manière à ce que cette dernière n’émette pas de champs radioélectriques supérieurs aux limites
specifées par Santé Canada pour le grand public; consulter le Code de sécurité 6, disponible sur
le site Web de Santé Canada, à l’adresse suivante: www.hc-sc.gc.ca/rpb
.
European Community—CE Notice (802.11a Radio):
Marking by the symbol:
CE Mark with notified body number
CE mark with NB# indicates compliance with the essential requirements of Directive 73/23/EC
and the essential requirements of articles 3.1(b), 3.2 and 3.3 of Directive 1999/5/EC. Such
marking is indicative that this equipment meets or exceeds the following technical standards:
EN 301 893 - Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;
Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive.
EN 301 489-17—Electromagnetic compatibility and Radio Spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific
conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN
equipment.
EN 60950—Safety of information technology equipment, including electrical business equipment.
Marking by the symbol:
Exclamation Mark !
Indicates that usage restrictions apply.