User's Manual
Table Of Contents
- Contents
- About this Document
- Introduction
- AP Network Attachment and Configuration
- AP Web Server
- Regulatory Compliance Information
Atheros Communications, Inc. AP Web Server • A-1
COMPANY CONFIDENTIAL March 2003 • A-1
A
A
AP Web Server
Configure the access point (AP) either through a web browser interface to the
AP web server, or using the command-line interface (CLI) through telnet. The
web server resides in the AP and is accessible from any station (STA) that is
connected to the AP Infrastructure network.
This appendix describes configuring the AP through the AP Web Server.
Accessing the AP Web Server
Follow these steps to access the AP Web Server:
1. Launch a web browser (Netscape Navigator or Internet Explorer are
examples of commonly used web browsers).
2. From the HPC, enter the IP address that is assigned to the AP as the URL
address. For example, enter http://192.168.1.1.