User's Manual
Table Of Contents
- Contents
- About this Document
- Introduction
- AP Network Attachment and Configuration
- AP Web Server
- Regulatory Compliance Information
Chapter
2
Atheros Communications, Inc. AP Network Attachment and Configuration • 2-9
COMPANY CONFIDENTIAL March 2003 • 2-9
The System Configuration window appears (see Figure 2-5).
7. Enter the SSID (name or address) for the AP in the SSID field. The SSID
must be 1–32 characters in length.
To configure a single SSID to have more than one AP in a single SSID,
specify a unique System Name for each AP within that single SSID.
Note that range of available channels will be automatically determined by
factory settings.
Note that the radio channel is specified using the IEEE 802.11a standard.
For example, channel 48 is the equivalent of 5.240 GHz. The formula
below shows how the channel number is derived:
Figure 2-5. System Configuration Window
Channel Number = Channel Frequency (in MHz) – 5000 MHz
5 MHz