User's Guide

D
O
N
O
T
C
O
P
Y
Preliminary
Page 14 • AP User’s Guide Atheros Confidential and Proprietary
October 2001 Subject to change without notice.
3. Press @ (Shift + 2) to continue, and the VxWorks image is loaded into the
SDRAM using the Ethernet connection.
Table 2 – Configuration Parameters For Booting VxWorks
Boot from Flash Boot from Ethernet
Default Setting National Semiconductor
boot device tffs0: dp0
processor number 0 0
host name Any value
file name /fl/vxworks Location of VxWorks stored in Host PC
inet on ethernet (e) IP address assigned to AP
inet on backplane
(b)
Blank
host inet (h) IP address set for the Ethernet device in Host PC
gateway inet (g) Any value
user (u) FTP login name (i.e. anonymous)
ftp password (pw) FTP password
flags (f) 0x0
target name (tn) Blank
startup script (s) Blank
other (o) dp See AP Programmer’s Guide for details