User's Manual

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from the one the receiver is connected to.
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet prepared by the Federal Communications Commission
helpful:
The Interference Handbook
This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402. Stock
No. 004-000-00345-4.
Industry Canada Requires the following wording to the end user in French and English:
Industry Canada Notice:
This device complies with Canadian RSS-210.
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmitting antenna)
that is installed outdoors is subject to licensing. The installer of this radio equipment must ensure
that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from Health Canada's web site
www.hc-sc.gc.ca/rpb.
"This Class B digital apparatus complies with Canadian ICES-003"
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
Avis de Conformité à la Réglementation d'Industrie Canada:
Pour empêcher toute interférence aux services faisant l'objet d'une licence, cet appareil doit être
utilisé à l'intérieur seulement et devrait être placé loin des fenêtres afin de fournir un écran de
blindage maximal. L'installateur du présent matériel radio doit s'assurer que l'antenne est située ou
pointée de manière à ce que cette dernière n'émette pas de champs radioélectriques supérieurs aux
limites specifées par Santé Canada pour le grand public; consulter le Code de sécurité 6, disponible
sur le site Web de Santé Canada, à l'adresse suivante: www.hc-sc.gc.ca/rpb.
End of Required User Manual Wording to end user provided by radio/system integrator