User's Manual

Qualcomm Atheros, Inc. Company Confidential
6 - DRAFT
Required Host System Labeling
FCCID and Industry Canada ID on Host System
The Integrator must affix the module’s FCC ID on the product. Since the Atheros SiP module is
too small to be labeled with the FCC ID and it is not vi
sible when installed in the host system, the
FCC ID label must appear on the outside of the host system visi
ble to the user.
Example wordi
ng to appear somewhere on the outside of the host system visible to the end user:
Contains FCC
ID:
PPD-AR4100
FCC Logo on the Host System
The FCC logo shown below must appear on the host system signifying declared compliance of
the system with FCC digital emissions rules.
 The AR4100 component will also be produced using the designation AR6103. There is no difference in the hardware.
This is done for marketing purposes.