User Manual

Section 3: MIDS Hand Held Receiver (MPDM)
Description
The Mini Portable Display Monitor (MPDM) is used to receive and display the ID code
number transmitted by an activated transmitter. Only one of 64 IDs can be displayed at a
time. When a sensor is activated, its ID replaces that of the previous ID displayed. Since
the MPDM can only display one ID at a time, it is intended to be used real time, for
immediate response or action.
Battery Cap
Display
Annunciator
Earphone
Jac
k
Antenna
Connector
Backlight
Channel: Factory Pre-Set Single Channel
Frequency Range: 138-174 MHz
Antenna: ¼ wave stub or ½ wave rod
Power Supply: 2 each 9 V DC Batteries
(MN1604)
Battery Life: 96+ hours with continuous
Operation
Design Features
• Adjustable audio level
• Backlight, for night time use
• ID lockout switches (selects which IDs are to be displayed)
• New ID indicator
• Receiver low battery indicator
• Sealed battery compartment
• Earphone jack, (when earphone is connected internal sonalert is muted)
• Recall last 10 received ID codes
• Potted and sealed electronic components
• Injection molded lexan plastic housing
• Metal battery cap clamps with heat welded screw inserts
• Frequency matched antenna
Caution: This receiver does not provide date and time information for received ID codes.
User must maintain a written log for use in determining history of ID codes received.
QTI Page 9 Revision: C
Form #: 30Z0147 Effective Date: 24 August 2006