User Manual

Section 2: MIDS Remote Control Transmitter (MRCT)
Description
The MIDS Remote Control Transmitter is used as a training and test unit. The MRCT
has changeable ID code switches mounted on the side of the receiver. The MRCT can be
set to ID codes 00-63. The switches are set to the desired ID code, and the transmit-
button is pressed. The hand held receiver receives the ID code that was set on the
MRCT. A special operation format is available for control of cameras, lights, gates, and
other devices to be activated.
Channel: Factory Pre-Set Single Channel
ID Codes: 00-63
Antenna: ¼ wave stub or ½ wave Rod
Frequency Range: 138-174 MHz
Power Supply: 2 each 9 V DC Batteries
(MN1604)
Battery Life: 4-6 months in temperate
climate
Antenna
Connecto
r
Transmit
Button
ID Code
Switches
Battery Cap
Design Features
• Easy to set ID code
• Command turn on for remote location items
• Training system for operators and deployed operations
• Allows for quick test of receivers and relays
• Sealed battery compartment
• Potted and sealed electronic components
• Injection molded lexan plastic housing
• Metal battery cap clamps with heat welded screw inserts
• Frequency matched antenna
QTI Page 6 Revision: C
Form #: 30Z0147 Effective Date: 24 August 2006