User Manual

Section 4 FCC Notice / RF Exposure
FCC Notices (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the manufacturer’s instruction manual, may cause interference with radio
communications. However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separations between the equipment and receiver
- Connect the equipment into an outlet on a circu8it different from that to which the
receiver is connected
- Consult the dealer or experience radio/TV technician for help.
FCC Compliance Information
The following information is provided on the device or devices covered in this document in
compliance with FCC regulations:
• Model Number: QTIMIDSMRLY, QTIEMIDSRSRY
• Company Name:
Qual-Tron, Inc.
9409 E. 55
th
Pl. S.
Tulsa, OK 74145-8157 USA
918-622-7052
RF Exposure – MPE / SAR
In order to comply with FCC RF Exposure requirements, this device must be installed and
operated in such a way that a minimum separation distance of 20cm is always maintained
between the antenna and all persons during normal operations.
QTI Page 9 Revision: F
Form #: 30Z0136 Effective Date: 23 August 2006