Instruction Manual

QTI Page 10 of 13 Revision: A
Form #: 30Z0250 Effective Date: 16 December 2009
Get serial number:
SRN<CR>
Returns:
SRN Z<CR>
TEMP… Get the board temperature in degrees Celsius, with a tenth degree precision.
Get temperature:
TMP<CR>
Returns:
TMP Z.Z<CR>
TRS…..Get/Set TRSS message format.
1 = ON (TRSS message format enabled, EMIDS disabled)
0 = OFF (TRSS message format disabled, EMIDS enabled)
Get TRSS format:
TRS<CR>
Returns:
TRS Z<CR>
Set TRSS format:
TRS 1<CR>
Returns:
TRS 1<CR>
Set EMID format:
TRS 0<CR>
Returns:
TRS 0<CR>
TXM…... Transmit Message; explained in Transmitting section below.
Send RF message:
TXM TT III SS<CR>, where TT is the message type,
III is the ID, and SS is the status code
Returns:
TXM XX YYY ZZ<CR>
VER…... Get the firmware version.
Get version:
VER<CR>
Returns:
MCDT VV.VVV B<CR>, where MCDT is the model
VV.VVV is the version, and B is the frequency band