Product Info

Software Specification
<Project name here>
Document Number 1193-30xx Page 8
This document contains confidential and proprietary information of Quake Global corporation. It may be used by recipient only for the purpose for which it was
transmitted and will be returned upon request or when no longer needed by recipient. Disclosure to unauthorized third parties or duplication without the express
written permission of Quake Global is prohibited. © 2022 QUAKE GLOBAL, INC. - All rights reserved
Confidential
Information classified Confidential
- Do not copy.
2.1.1.2 Option 2: Ethernet Connection (Do not perform if serial connection used)
Configuring for an Ethernet application requires the additional step of setting the host static IP address. While the
terminal is provisioned with a static IP address, the host PC will need a static IP address. Follow the instructions
below to set a Windows host with a static IP address.
2.1.1.2.1 Setting the Host Static IP
To set a static IP address on a windows host open the network and file sharing center from the system tray:
Figure 5 Open Network and Sharing Center
Next, from the Network and Sharing Center, select ‘Change adapter settings’.
Figure 6 Changing the Adapter Settings