Product Info

Software Specification
<Project name here>
Document Number 1193-30xx Page 4
This document contains confidential and proprietary information of Quake Global corporation. It may be used by recipient only for the purpose for which it was
transmitted and will be returned upon request or when no longer needed by recipient. Disclosure to unauthorized third parties or duplication without the express
written permission of Quake Global is prohibited. © 2022 QUAKE GLOBAL, INC. - All rights reserved
Confidential
Information classified Confidential
- Do not copy.
1 Introduction
The HPRO set up instructions demonstrates basic functionality of the HPRO device. With these steps the user can
test functionality of the various hardware functions and features. The primary purpose of these instructions is to
assist with the following:
• CE/FCC Testing
• Cellular Testing
• Reliability and Environmental Testing
This User’s Guide describes the following activities:
• Connecting the device to support equipment.
• Configuring minimal support equipment.
• Executing and operating the HPRO to get desirable outputs.
1.1 Prerequisites
The user of this guide should be comfortable working with low-voltage circuits, connecting wires and have a basic
understand of serial ports, Ethernet, and operating terminal emulation software from a windows PC.
1.1.1 Available from Quake
Quake Part Number
Description
1193-5000 or 1193-5001
RED, AS-SHIPPED, HPRO-4G-B
1193-0217
1193-0217 RED, ASSY, CABLE, TEST, QCONNECT
ANTENNA, GPS
Table 1 Quake Provided Support Equipment
1.1.2 Recommended Minimum Support Equipment
• USB-to-Serial Adapter
• Terminal Software, for example, Tera Term or equivalent. https://osdn.net/projects/ttssh2/releases/
• 12-24 VDC power source capable of supplying 2A, a 12V automotive battery is recommended
• E-SIM provisioned and activated, nano-sim slot provisioned.