Product Info

Software Specification
<Project name here>
Document Number 1193-30xx Page 20
This document contains confidential and proprietary information of Quake Global corporation. It may be used by recipient only for the purpose for which it was
transmitted and will be returned upon request or when no longer needed by recipient. Disclosure to unauthorized third parties or duplication without the express
written permission of Quake Global is prohibited. © 2022 QUAKE GLOBAL, INC. - All rights reserved
Confidential
Information classified Confidential
- Do not copy.
data_type=0, BW=0, gi=1, opt1=0x0,
opt2=0x0
src=00:11:22:33:44:55
dst=01:02:03:04:05:06)...
>cTxOff
To change between channels:
linux prompt>>./wifiTest inter
>start
>cOn
>cCh 1 0 0
>cPow 16500 0
>cTxOn 0 0
EXPECTED OUTPUT:
Calibrator:: Starting TX Simulation (delay=200, rate=13, size=500, mode=0
data_type=0, BW=0, gi=1, opt1=0x0,
opt2=0x0
src=00:11:22:33:44:55
dst=01:02:03:04:05:06)...
>cTxOff
>cCh 6 0 0
>cTxOn 00
EXPECTED OUTPUT:
Calibrator:: Starting TX Simulation (delay=200, rate=13, size=500, mode=0
data_type=0, BW=0, gi=1, opt1=0x0,
opt2=0x0
src=00:11:22:33:44:55
dst=01:02:03:04:05:06)...
For antenna locations, see it marked in red on the top cover of the device: