Product Info

Software Specification
<Project name here>
Document Number 1193-30xx Page 13
This document contains confidential and proprietary information of Quake Global corporation. It may be used by recipient only for the purpose for which it was
transmitted and will be returned upon request or when no longer needed by recipient. Disclosure to unauthorized third parties or duplication without the express
written permission of Quake Global is prohibited. © 2022 QUAKE GLOBAL, INC. - All rights reserved
Confidential
Information classified Confidential
- Do not copy.
and then
./S50sshd restart
Then connect to ssh and paste a message related to the picture
Pasted underneath
and then go to tera term and change the date and time from the unit.
type:
date +%Y%m%d -s "20081128"
Depending on the type of testing, support equipment may, or may not be required.
Sub System
Required Equipment
Optional Equipment
GPIO
Switch box to set GPIO high/low
Analog
Switch box to set ADC 1 and 2 from 0 to 32VDC
Cellular
SIM Card and Cellular Antenna w/sense
GNSS/GPS
GNSS Antenna w/sense
CAN Ports
CAN source (Q4000 or equivalent)
Ethernet
PC
Dedicated PC running iperf
Bluetooth
BT Peripheral
Wi-Fi
Router
To exit the Monitor Test type ‘!’ or the exclamation mark. The cell and wi-fi module will be detached and
shutdown.