Product Info

Software Specification
<Project name here>
Document Number 1193-30xx Page 10
This document contains confidential and proprietary information of Quake Global corporation. It may be used by recipient only for the purpose for which it was
transmitted and will be returned upon request or when no longer needed by recipient. Disclosure to unauthorized third parties or duplication without the express
written permission of Quake Global is prohibited. © 2022 QUAKE GLOBAL, INC. - All rights reserved
Confidential
Information classified Confidential
- Do not copy.
Set Properties as shown below, then click ‘OK’.
Figure 9 Setting the IP Address
The Windows host now has a static IP address.
2.1.1.2.2 Establishing the Connection with Tera Term
Connect the RJ45 Ethernet cable from the device to the host PC with a static IP address as shown above. Turn the
supply ‘ON’ or make the final battery connection to power the unit ON.
Wait approximately 30 – 60 seconds for the device to complete its boot process before continuing.
On the host PC, utilize terminal emulation software such as TeraTerm to open a TCP/IP connection to the
QConnect terminal. If you do not have terminal emulation software download and install TeraTerm using the link
and instructions provided at the beginning of this document.
When TeraTerm launches, select ‘TCP/IP’ in the connection dialog and the appropriate adapter from the dropdown
dialog box. You must use 192.168.35.10 for the Host address as shown below.