User Manual Part 7

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 116
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Each time the modem is power cycled, another line is added to the position output, until the
maximum number of lines is reached. After this, the oldest entry in the array is overwritten by a
new position.
Figure 12-53: DemoAppFFS - Logger output for next Power On
To remove the FFS file and start over, on the Logger port type ‘d’, ‘f’, ‘r’, ‘CRUMBS.DAT.’ This
will remove the FFS file created by the application. The next time the application is run, a new file
will be created.