User Manual Part 6

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 162
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Appendix F - Glossary of terms
ADC Analog to Digital Converter
API Application Programming Interface
BPS Bits per Second
CAN Controller Area Network
CD Carrier Detect Signal
CR Carriage Return
DIO Digital Input/Output
DTE Data Terminal Equipment
DTR Data Terminal Ready signal
EDA Event Driven Architecture
FFS Flash File System
FTP File Transport Protocol
GPRS General Packet Radio Service
GPS Global Positioning System
GSM Global System for Mobile communications
GUI Graphical User Interface
ICD Interface Control Drawing
IDE Integrated Development Environment
IMS International Mobile Subscriber identify
LEO Low Earth Orbit
LF Line Feed
LSB Least Significant Bit
MHz Megahertz
MID Message Identification
MO Mobile Originated (Iridium network)
MT Mobile Terminated (Iridium network)
MTS Main Transport Socket
NCC Network Control Center
NVM Non-Volatile Memory
O/R Originator/Recipient
OSI ORBCOMM Serial Interface
OTA Over the Air
PGN Parameter Group Number
POP Post Office Protocol
QCFG QUAKE Configuration Parameters
QCP QUAKE Configuration Protocol
QCT QUAKE Configuration Tool
QFFS QUAKE Flash File System
QMM QUAKE Memory Manager
QRTOS QUAKE Real-time Operating System
RPM Revolutions Per Minute
RTC Real-time Clock
RTOS Real-time Operating System