User Manual Part 6

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 155
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Appendix C - QUAKE’s Iridium & Inmarsat config parms (QCFG)
Table C-1: QUAKE’s Iridium and Inmarsat configuration parameters
Num
Name
Def
Val
Min
Val
Max
Val
DTE
Access
Description
0x80 QCFG_LOG_DEBUG_LEVEL 4 0 6 Level of logging messages
output
0x81 QCFG_GPS_LOGGING 0 0 1 R/W GPS Task debug logging
enable
0x82 QCFG_TL_LOGGING 0 0 1 R/W 0: Not enabled
1: Enable Transport Layer
debug logging (must be set
for prms 0x83-0x88 to take
effect)
0x83 QCFG_DLEVPROC_LOG_LEVEL 0 0 5 R/W Downlink Event Proc Task
debug level
0x84 QCFG_ULMGR_LOG_LEVEL 0 0 5 R/W Uplink Mgr Task debug
level
0x85 QCFG_SPP_LOG_LEVEL 0 0 5 R/W Serial Pkt Proc Task debug
level
0x86 QCFG_MODEM-TMGR_LOG_LEVEL 0 0 5 R/W modem-T Msg Mgr Task
debug level
0x87 QCFG_MODEM_LOG_LEVEL 0 0 5 R/W TL modem Task debug
level
0x88 QCFG_OSPM_LOG_LEVEL 0 0 5 R/W OB Serial Pkt Mgr Task
debug level
0x89 QCFG_MSN_SAVE_OPTION 0 0 1 R/W 0: Save MSN data to flash
on [controlled] power down
only
1: Save MSN data to flash
on any change
0x8b QCFG_MTS_AUTO_ROAMING_ENA 0 0 1 R/W 0: Not enabled
1: Enable Auto-
Roaming for
message packets received
on MTS Port
0x8c QCFG_QLM_LOG_MASK - - - - Not supported
0x8d QCFG_DUPL_USR_CMD_TIME_S 900 30 3600 R/W Number of Seconds for
which User Command
duplicates will be discarded
0x8e QCFG_POWER_SAVING_MASK - - - - Not supported
0x90 QCFG_PREF_NETWORK 0 0 3 0 – GSM first
1 – Sat first
2 – GSM only
3 – Sat only
0x92 QCFG_MDMIF_PORT 3 0 4
0x94 QCFG_DBG_UTILITY_LEVEL 5 0 5 R/W Debug Mode log level
0x95 QCFG_MTS_ARCHIVING_ENA 0 0 1 R/W 0: Not enabled
1: Enable Message
Archiving to flash memory
of msg packets received on
the MTS Port
Additional notes: When this parameter is enabled, modem-O msgs will be stored in NVM. If the modem loses
power or is put into sleep mode it will retrieve any unsent msgs at boot up and return them to the msg queue.
0x98 QCFG_MODEM_APN_USER None User login name if required
0x99 QCFG_MODEM_APN_PASS None User password if required