User Manual Part 6

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 153
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Num
Name
Def
Val
Min
Val
Max
Val
DTE
Access
Description
0x99 QCFG_MODEM_APN_PASS None User password if required
0x9a QCFG_OSI_IB_ROUTE 1 0 2 R/W Route inbound
messages/commands to:
0=Application; 1=Transport
Layer; 2=Both
0x9b QCFG_MODEM_BAND 3 0 3 Not supported
0x9d QCFG_MODEM_APN_ADDRESS Network provider name.
Default: ORBCOMM.t-
mobile.com
0x9e QCFG_MODEM_CONNECT_DUR_S 90 0 65535 If there’s no data exchange
within this timeout period
(seconds) the connection is
closed. 0 for no timeout
0x9f QCFG_EXT_MODEM_ID_INTERVAL 0 0 65535 R/W ID Message interval (in
seconds).
0xa0 QCFG_MDMIF_BAUD_RATE - - - - Not supported
0xa1 QCFG_REQUEST_GLOBALGRAMS 0 0 1 R/W 0: Not Enabled
1: Automatically send a
Communications Command 2
(Request Globalgrams) to
satellites that come into view
Additional notes: This parameter (0xa1) must be enabled in order to receive modem-
T Globalgrams. When
set to 1 the modem will send a request to each satellite passing over that is in Globalgram mode
requesting any modem-T Globalgrams.
0xa2 QCFG_POS_FILTER_MAX_VEL 50 0 65535 R/W Max. allowed speed in GPS
position samples (meters per
Second). GPS samples with
a larger speed will be
discarded
0xa3 QCFG_POS_FILTER_MAX_DIFF 25 0 100 R/W Max. allowed difference in
change in distance vs. speed
× change in time between
successive GPS samples (%).
Higher values (50-75%) can
reduce average time-to-fix
(particularly in high
acceleration scenarios) but
will reduce outlier rejection
effectiveness. Set to 100 to
disable this algorithm
0xa4 QCFG_SMTP_SERVER_ADDR None Address of SMTP mail server
0xa5 QCFG_SMTP_SERVER_PORT 25 0 65535 SMTP port (generally 25)
0xa6 QCFG_SMTP_USER None SMTP account user name
0xa7 QCFG_SMTP_PASS None SMTP account password
0xa8 QCFG_SMTP_TO_ADDR None Default email address to
which to send messages
0xa9 QCFG_SMTP_SUBJ None Default subject of the email
0xaa QCFG_POP_SERVER_ADDR None None None R/W POP server address
0xab QCFG_POP_SERVER_PORT 25 1 65535 R/W POP port
0xac QCFG_POP_USER None None None R/W Pop username
0xad QCFG_POP_PASS None None None R/W Pop password