User Manual Part 6

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 152
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Appendix B - QUAKE’s ORBCOMM configuration parms (QCFG)
Table B-1: QUAKE’s ORBCOMM configuration parameters
Num
Name
Def
Val
Min
Val
Max
Val
DTE
Access
Description
0x80 QCFG_LOG_DEBUG_LEVEL 4 0 6 R/W Logger Port log level
0x81 QCFG_GPS_LOGGING 0 0 1 R/W GPS Task debug logging
enable
0x82 QCFG_TL_LOGGING 0 0 1 R/W 0: Not enabled
1: Enable Transport Layer
debug logging (must be set
for prms 0x83-0x88 to take
effect)
0x83 QCFG_DLEVPROC_LOG_LEVEL 0 0 5 R/W Downlink Event Proc Task
debug level
0x84 QCFG_ULMGR_LOG_LEVEL 0 0 5 R/W Uplink Mgr Task debug level
0x85 QCFG_SPP_LOG_LEVEL 0 0 5 R/W Serial Pkt Proc Task debug
level
0x86 QCFG_MODEM-TMGR_LOG_LEVEL 0 0 5 R/W modem-T Msg Mgr Task
debug level
0x87 QCFG_MODEM_LOG_LEVEL 0 0 5 R/W TL modem Task debug level
0x88 QCFG_OSPM_LOG_LEVEL 0 0 5 R/W OB Serial Pkt Mgr Task
debug level
0x89 QCFG_MSN_SAVE_OPTION 0 0 1 R/W 0: Save MSN data to flash on
[controlled] power down only
1: Save MSN data to flash on
any change
0x8b QCFG_MTS_AUTO_ROAMING_ENA 0 0 1 R/W 0: Not enabled
1: Enable Auto-Roaming for
message packets received on
MTS Port
0x8c QCFG_QLM_LOG_MASK - - - - Not supported
0x8d QCFG_DUPL_USR_CMD_TIME_S 900 30 3600 R/W Number of seconds for which
User Command duplicates
will be discarded
0x8e QCFG_POWER_SAVING_MASK - - - - Not supported
0x90 QCFG_PREF_NETWORK 0 0 3 0 – GSM first
1 – ORBCOMM first
2 – GSM only
3 – ORBCOMM only
0x92 QCFG_MDMIF_PORT 3 0 3 Do not change
0x94 QCFG_DBG_UTILITY_LEVEL 5 0 5 R/W Debug mode log level
0x95 QCFG_MTS_ARCHIVING_ENA 0 0 1 R/W 0: Not enabled
1: Enable message archiving
to flash memory of message
packets received on MTS port
Additional notes: When this parameter is enabled modem-O messages will be stored in NVM. If the
modem loses power or is put into sleep mode it will retrieve any unsent messages at boot up and return
them to the message queue.
0x98 QCFG_MODEM_APN_USER None User login name if required