User Manual Part 6

User Guide to Q4000/QPRO
Document Number 1135-4713 Rev G
THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION OF QUAKE GLOBAL CORPORATION. IT MAY BE USED BY
RECIPIENT ONLY FOR THE PURPOSE FOR WHICH IT WAS TRANSMITTED AND WILL BE RETURNED UPON REQUEST OR WHEN NO LONGER NEEDED
BY RECIPIENT. DISCLOSURE TO UNAUTHORIZED THIRD PARTIES OR DUPLICATION WITHOUT THE EXPRESS WRITTEN PERMISSION OF QUAKE
GLOBAL IS PROHIBITED.
Page 151
CONFIDENTIAL
Information classified Confidential
-
Do not copy (See last page for obligations)
Num Name
Def.
Value
Min
Value
Max
Value
DTE
Access
Description
0x32 sw_version --- --- --- R
Modem software version. For
example, July 5, 2005 will return
decimal 7055.
0x33 hw_version --- --- --- R
NOT SUPPORTED
Numb
er
Name
Def.
Value
Min
Value
Max
Value
DTE
Access
Description
0x34 ser_spec_rev 'G' 'G' --- R
modem Serial Interface Specification
revision supported
0x35 manu_id 4 4 4 R 4: QUAKE Global, Inc.
0x36 pos_det_supported 1 0 1 R NOT SUPPORTED
0x37 most_recent_dl --- 50 349 R Most recent downlink channel
0x38 dl_chan_list --- --- --- R NOT SUPPORTED
0x39 debug_lvl 5 0 5 R/W NOT SUPPORTED
0x3a rcvr_power 2 0 2 R/W
0. Receiver OFF
1. Listen to DL 6/16
2. Receiver continuously ON
0x3b send_pass_predict 0 1 0 W
When 1, passes Ephemeris, Satellite
plane orbital elements packets to
Application/DTE
0x3c
-
0x72
RESERVED FOR
FUTURE
ORBCOMM USE
--- --- --- --- ---
0x73 initial_pos_det 0 0 1 W NOT SUPPORTED
0x74
-
0x78
DOPPLER
POSITIONING
PARAMETERS
--- --- --- --- NOT SUPPORTED
0x79
-
0x7f
BYTE MODE
PARAMETERS
--- --- --- --- NOT SUPPORTED
0x80
-
0xff
See Appendix B -
QUAKE’s ORBCOMM
configuration parms
(QCFG)
--- --- --- ---
QUAKE-specific configuration
parameters